• "VSV PLUS" - Construction chemistry and reagents.
  • Anti-icing reagent ICEMELT
Thanks to the technology of compacting, the material is effective both for preventing ice formation and for simplifying measures for cleaning up the territory from the formed ice cover. ICEMELT ™ is quickly incorporated into the work, penetrating like a thermal drill through the formed ice, destroying its connection with the cleaning surface. Benefits: Conform to the requirements of set for PGM and exceed them Effective over the widest temperature range Have a high melting capacity Have a prolonged action effect Have low consumption rates Adapted for storage Comply with environmental regulations Harmless for any coatings We present to your attention clever anti-icing reagent - ICEMELT ™, developed by specialists of the manufacturer of innovative anti-ice reagents Zirax plc. ICEMELT ™ is a system in which two anti-ice components are combined in an ideal proportion: anhydrous calcium chloride (CaCl2) and evaporated sodium chloride (NaCl). These components are the first helpers in the fight against ice and snow. They are individually destroys the ice (acting in different temperature regimes). The principal difference between the ICEMELT ™ Intelligent Anti-Ice Reagent and any mechanical mixtures is that in each granule of the substance all the constituent ingredients are contained. By combining them together you will receive a unique highly effective product with a synergistic. One granule of the reagent consists of heat-releasing calcium chloride (CaCl2) and heat-absorbing sodium chloride (NaCl). This makes possible to obtain an effect that greatly exceeds the strength action of the individual components. Smart ICEMELT thanks to its compact formula knows how to act in a particular situation: Getting on the ice or snow rolls - it starts to sink and destroy it. Falling on pure pavement and concrete - it forms a protective layer, preventing the appearance of ice. Differences ICEMELT from other anti-ice materials: Has the least impact on the environment, green spaces, animals and people. Anti-corrosion additives ICEMELT ™ reduce the negative impact on metal products. Has no chemical effect on pavement, concrete and tile coatings. The melting rate of ice is 3-5 times higher than that of salt, the consumption is 40-75% less, the operating temperature range is extended to -25C. You can buy this intelligent anti-ice material and make sure by yourself that this is an innovative product of the 21st century that fully require for the PGM and makes sure of its uniqueness.  

Indicator

Norm

Actual

Appearance

Pressed granules of irregular shape

Match

Color

From white to light grey

Match

Smell

Absence

Match

Mass fraction of calcium chloride%

15-50

Match

Mass fraction of sodium%

50-85

Match

Mass fraction of water insoluble residue%

2,5

Match

Mass fraction of water not more than %

5

Match

Hazard class IMO, ADR

Absence  (NOT dangerous cargo according to IMO)

Marking:

In accordance with the manufacturer's marking, it meets the requirements of transport marking in accordance with GOST 14192

Conclusion:

ICILELT ™ anti-icing material meets the requirements in accordance with STO 39297743-01-2008 with amend. 1-4.

ICEMELT ™ - fire and explosion-proof, toxic compounds in the air and wastewater do not form in the presence of other substances; it is not cumulated in the body. The warranty period for storage of ICEMELT ™ antifoaming material is 18 months from the bottom of the product, provided the manufacturer's packaging is kept tight. General recommendations for the application of high-performance ICEMELT ™ PGM series under different weather conditions:
  • Short-term snowfalls;
  • Small and moderate snowfall;
  • Strong protracted snowfalls;
  • Hail, rain with snow
  • Frost;
  • Ice;
  • Black ice;
The use of ICEMELT ™ Smart Anti-Ice reagent does not require large physical and material costs. Just need to follow the basic recommendations for its use:
  • as a preventive tool - timely surface treatment before or during the formation of ice;
  • as a means of combating icing - the application of ice on the ice and the timely cleaning of the destroyed and peeling off the ice.
The tables systematize the instructions for the processing of roadways, adjacent areas for a particular type of weather. It is necessary to take into account the physical condition of roads, traffic density during work.

1. Norms of sprinkling during short (weak) snowfalls 

Air temperature

Condition of surface

First treatment  ( 1 мм fallout)

Prevention(gram on 1 м2)

Note

> 00C, not changing

dry snow porridge, a small layer of snow

Ice melt Mix:  40  Ice melt:  40

Recycle ice islands

Keep track on fallouts, temperature.

 from -70C до  00С, falls

dry / wet snow porridge, light snow

Ice melt Mix : 40   Ice melt: 40

Re-treatment in 3-4 hours

Keep track on fallouts, temperature.

Changing -150C – 70С

snow porridge, thin ice, a layer of snow

Ice melt: 80  Ice melt Power: 80

Re-treatment in 3-4 hours

Keep track on fallouts, temperature. Use the snow plow.

Changing -240C – 150С

snow porridge, thin ice, a layer of snow

Ice melt: 80  Ice melt Power: 80

Re-treatment in 3-4hours

Keep track on fallouts, temperature. Use the snow plow.

Changing -350C – 150С

snow porridge, thin ice, a layer of snow

Ice melt Power: 80

Re-treatment in 4-5 hours

Keep track on fallouts, temperature. Use the snow plow.

USEFUL ADVICE: (1) Regular treatment prevents the formation of "snow-packing” (2) Sprinkle materials before the peak hours (3) Carry out mechanized (manual) cleaning of excess snow / snow porridge, ice / before sprinkling the material. Then the canvas will be wet, the formation of snow or ice will be minimal.

2. Norms of sprinkling during small and significant snowfalls

Air temperature

Condition of surface

First treatment (on 1 мм fallouts)

Prevention (gram on 1 м2)

Note

Light snow

Significant snowfall

> 00C, not changing

dry / wet snow porridge, light snow

Ice melt Mix  40  Ice melt:  40

Repeat at the beginning of new fallouts

Keep track on fallouts

from -40С до 00C, changing

Dry snow porridge

Ice melt Mix — 40

40

80

Increase the frequency in case of intensive fallouts

Ice melt:  40

40

80

from -150С to -40C, changing

dry / wet snow porridge, snow

Ice melt:  40

80

100

In case of light fallouts = 70 г.

Ice melt Power: 40

80

100

From -250С to -150C, falling

Dry snow, ice

Ice melt: 100

If necessary, repeat the procedure.

Use the snow plow.

Ice melt:  100

from -350С to -250C, falling

Dry snow, ice

Ice melt Power: 100

If necessary, repeat the procedure.

Use the snow plow.

  USEFUL ADVICE: (1) Regular treatment prevents the formation of "snow-packing" (2) Sprinkle materials before the peak hours (3) Carry out mechanized (manual) cleaning of excess snow / snow porridge, ice / before sprinkling the material. Then the canvas will be wet, the formation of snow or ice will be minimal. (4) In frost (-250C) and heavy rainfall, use Ice melt Power.

3. Norms of sprinkling while heavy snowfalls

Air temperature Precipitation First treatment (on 1 мм fallouts) Prevention (gram on 1 м2) Note
> 00C, no changing snow porridge, thin ice, a layer of snow Ice melt Mix:  40 40 At the beginning of precipitation. Use the snowplow
Ice melt:  40 40
From -10С to 00C, changing snow porridge, thin ice, a layer of snow Ice melt Mix: 40 40 If necessary, increase the norm to 80 g.
Ice melt: 40 40
from -40С to -10C, changing snow porridge, thin ice, a layer of snow Ice melt Mix: 80 80-100 If necessary, increase the rate to 160 g. Mechanical cleaning
Ice melt: 80 80-100
Ice melt Power: 60 60-80
from -150С to -40C, changing snow porridge, ice, a layer of snow Ice melt: 80 100 increase the rate to 180 g. Mechanical cleaning
Ice melt Power:  80 100
from -250С to -150C, changing dry snow layer, "snow roll" Ice melt: 100 100-180 Apply snow removal equipment. increase the rate to 180 g
Ice melt Power: 100

from -350С to -150C, changing

Extreme winter

Ice melt Power — 100 100-180 Apply snow removal equipment.

 USEFUL ADVICE:

(1) Regular treatment prevents the formation of "snow-packed snow" (2) Sprinkle materials before the peak hours (3) Before the application, carry out mechanical cleaning of the snow. After treatment, remove the ice and "compressed snow." (4) In frost (-250C) and heavy rainfall, use Ice melt Power.

(5) Use the NEXTRA trolley for quickly and evenly sprinkle a large number of PGM.

4. Norms of sprinkling in case ice

Air temperature Condition of roadway deck First treatment (on 1 мм fallouts) Prevention (gram on 1 м2)                     Note
> 00C, not changing dry / wet slippery surface Ice melt Mix:40 30-40 Processing of ice islands. Watch out for precipitation.
Ice melt:30 30-40
from-10С to 00C, changing Thin layer of ice Ice melt Mix:40 30-40 Processing of ice islands. Watch out for precipitation.
Icemelt:30
from -70С to 00C, changing dry slippery surface, ice Ice melt Mix : 30-100 30-100  Watch out for precipitation.
Ice melt: 30-100
from -150С to -70C, changing Thick ice, compressed snow. Ice melt Mix : 140 100-140 Apply snow removal equipment. Watch out for precipitation.
Ice melt: 100
Ice melt Power: 80 80-100
from -250С to -150C, changing Thick ice, compressed snow. Ice melt: 180 150-180 Apply snow removal equipment. Watch out for precipitation.
Ice melt Power: 150
from -350С to -150C, changing Thick ice, compressed snow. Ice melt Power: 150 150-180 Apply snow removal equipment. Watch out for precipitation.
USEFUL ADVICE: (1) Regular treatment prevents the formation of a thick layer of ice and ice blocks. (2) Sprinkle the materials before the peak hours. (3) Before use, carry out mechanical cleaning. After treatment, remove the ice or "compressed snow". (4) In frost (-250C) and heavy rainfall, use Ice melt Power. (5) Use the NEXTRA trolley to quickly and evenly sprinkle a large number of plastics.

5. Hail, snow raining 

Air temperature First treatment (on 1 мм fallouts) Prevention (gram on 1 м2) Note
> 00C, no changing Ice melt  Mix: 50 50 Watch out for the temperature and precipitation. Do preventive maintenance before the beginning of precipitation.
Ice melt: 50 50
from -20С to 00C, changing Ice melt Mix: 30-150 30-150 Do preventive maintenance before the beginning of precipitation. The rate varies in the range depends on the intensity of precipitation.
Ice melt: 30-150
from -150С to -20C, changing Ice melt Mix: 100-160 Do preventive maintenance before the beginning of precipitation. The rate varies in the range depends on the intensity of precipitation.
Ice melt:  100-160
from -150С to -70C, changing Ice melt: 100-160 100-160 Norms vary depending on the intensity of precipitation. At the first treatment use a snow blower.
Ice melt Power: 100-160
from -250С to -150C, changing Ice melt: 100-160 100-160 Norms vary depending on the intensity of precipitation. At the first treatment use a snow blower.
Ice melt Power 100-160
from -310С to-200C, changing Ice melt Power: 100-160 100-160 Norms vary depending on the intensity of precipitation. At the first treatment use a snow blower..
USEFUL ADVICE: (1) Regular treatment prevents the formation of a thick layer of ice and ice blocks. (2) Sprinkle the materials before the peak hours. (3) Before use, carry out mechanical cleaning. After treatment, remove the ice or "compressed snow". (4) In frost (-250C) and heavy rainfall, use Ice melt Power. (5) Use the NEXTRA trolley to quickly and evenly sprinkle a large number of plastics.

6. Black ice or hoarfrost

Air temperature Condition of roadway deck First treatment (on 1 mm fallouts) Prevention (gram on 1 м2) Note
> 00C, no changing Any level Ice melt Mix: 30 10-30 Watch the temperature, the level of condensation on the surface
Ice melt: 10-30
from -20С to 20C, changing интенсивность движения до 100 автомобилей/час Ice melt Mix: 30 10-30 Watch the temperature, the level of condensation on the surface
Icemelt:10-30
from -70С to -20C, changing Any level Ice melt Mix : 30-50 30-50 Watch the temperature, the level of condensation on the surface
Ice melt: 30-50
From -150С to -70C, changing Any level Ice melt Mix : 50-70 50-70 Watch the temperature, the level of condensation on the surface and the intensity of movement.
Ice melt: 50-70
Ice melt Power: 50-70
From  -250С to -150C, changing              Any level Ice melt: 70-100 70-100 Apply snow removal equipment
Ice melt Power: 70-100
From -310С to —0C, changing Any level Ice melt Power: 70-100 70-100 Apply snow removal equipment
 USEFUL ADVICE: (1) Follow the weather forecast. Sprinkle the materials 1-2 hours before the icing. (2) For fast effect at frost (-250C) - use Ice melt Power. (3) For the treatment of a large section of the road, use a special technique. For fast and uniform sprinkling use the trolley for PGM in parking lots / parks /

Write a review

Note: HTML is not translated!

Anti-icing reagent ICEMELT

  • Product Code: 131
  • Availability: In Stock
  • 22 грн.


Просмотренные товары

Anti-icing reagent ICEMELT

Anti-icing reagent ICEMELT

Thanks to the technology of compacting, the material is effective both for preventing ice formation ..

22 грн.

Call Back