• "VSV PLUS" - Construction chemistry and reagents.
  • Гидроизоляция бетона ГИДРОТРОН-Д
HYDROTRON-D® - is designed to ensure water tightness of monolithic concrete and for concrete structures at the beginning stage of concreting. HYDROTRON-D increases the strength of concrete in the early and design ages to 25-30%. It increases the frost resistance by 50 cycles (which makes it possible to obtain concrete with a mark on frost resistance P300), increases water resistance by 2-4 steps. HYDROTRON-D significantly improves the resistance of concrete to aggressive environments, preventing the destruction of cement stone as a result of gas, water-salt and biological corrosion. The use of additive makes the concrete impenetrable for engine oils and salt. In comparison to regular concrete the corrosion resistance of concrete is increased by 1.5 times because of HYDROTRON-D. The use of this composition to ensure water tightness and corrosion resistance of concrete meets the requirements of the "Guidelines for the use of chemical additives in concrete" and "Recommendations for the protection of structures of agricultural buildings and other structures". By efficiency HYDROTRON-D exceeds many of the supplements recommended in these regulatory documents. HYDROTRON-D does not cause corrosion of the reinforcement and does not impair the passivation action of concrete in relation to steel reinforcement, since it chemically binds most of the water initially found in concrete. The mix is non-toxic and fire-explosion-proof. It is allowed to use additives in concretes that having contact with drinking water. HYDROTRON-D is also compatible with other additives. The optimum amount of additive is 10 kg / m³, regardless of the grade of concrete and the binder's consumption. In this case the introduction of an additive is made instead of a part of the binder. The amount of water for mixing does not change. On the production site it is allowed to add the HYDROTRON-D mix directly to the mixer with the ready-mixed concrete. At the same time, add the additive gradually, pouring it into a rotating mixer. It is not allowed to fill out the all amount of the additive at a time to avoid the formation of lumps and its non-uniform distribution over the volume of the concrete mix in the mixer. Mixing time is at least 15 minutes. At a break in concreting for more than a day, it is necessary to remove the cement film in place of the joint and primer the plane with a liquid solution of HYDROTRON-D (B / T 1/1) before the next pouring of concrete. Priming with the composition HYDROTRON-D allows you to get rid of the "cold seam" on concrete. Technical characteristics of the composition HYDROTRON-D

№ n/n

Indicator name

Meaning

1

Humidity,% by weight, no more than

1,5

2

Bulk density, kg / m³

1300

3

Increase of brand for water resistance of concrete, steps not less than

2-4

4

Increase of brand for water resistance of concrete, steps not less than

25-30

5

Increase of the brand for frost resistance, PZO cycles, not less than

50

6

Resistance of concrete to petroleum products

persistent

7

Acidity of the environment, pH

from 3 to 11

8

Application temperature (environment), ° С

-60 to + 130

9

Amount of water per 1 kg of dry mixture, ml.

Not added

10

Packing, kg

Plastic buckets 10 kg

Write a review

Note: HTML is not translated!

Гидроизоляция бетона ГИДРОТРОН-Д

  • Product Code: 163
  • Availability: In Stock
  • 2,000 грн.


Просмотренные товары

Гидроизоляция бетона ГИДРОТРОН-Д

Гидроизоляция бетона ГИДРОТРОН-Д

HYDROTRON-D® - is designed to ensure water tightness of monolithic concrete and for concrete structu..

2,000 грн.

Call Back