• "VSV PLUS" - Construction chemistry and reagents.
  • Floor screed C-42
APPLICATION AREA The floor screed is used on concrete or cement mortar bases, for laying and repairing floors inside and outside the building. TECHNICAL DATA The proportion of the mixture: 0.18 - 0.2 liters of water / kg. The consumption for a layer thickness of 1 mm is 2 kg / m2. The recommended thickness of the layer is from 40 mm to 100 mm. The suitability of the solution for use is 1 hour. Readiness for initial loads - after 8 hours. Further work - not earlier than 3 days. Vintage strength - min 30 MPa. Frost resistance - max 75 cycles. The temperature of the substrate is from + 50 ° C to + 300 ° C. The operating temperature ranges from -300C to + 850C. PREPARATION OF FOUNDATION The substrate must be cleaned of dust, oils, glue and other substances that can weak the bonding strength of the mixture to the substrate. On the substrate it is recommended to apply an even layer of a deep penetration primer. MODE OF APPLICATION The finished mixture is laid with a spatula on the prepared substrate with one layer of the required thickness, the polymer-cement mixture should be used in the viability range of the mixture. During the hardening of the floor, drafts and direct sunlight should be avoided. Walk on the cover can be in 48 hours. STORAGE The floor screed S-42 is stored in tightly closed bags in dry rooms. The shelf life of the dry mix is 12 months. CONSUMPTION To obtain the solution, add 4-5 liters of water to 25 kg of dry mixture (1 bag).

Write a review

Note: HTML is not translated!

Floor screed C-42

  • Product Code: 107
  • Availability: In Stock
  • 51 грн.


Просмотренные товары

Floor screed C-42

Floor screed C-42

APPLICATION AREA The floor screed is used on concrete or cement mortar bases, for laying and repair..

51 грн.

Call Back